Applications / Traditional art practice
Kolam dot grid printer
Type the dot count you see in a kolam book or video — 15-1, 21-11, 7x7 or 1-3-5-3-1 — and get a correctly spaced pulli grid you can print, practise on and scale up to your doorstep.
Make your dot grid
Quick tries:
How to use the kolam dot grid printer
- Copy the dot count from the kolam you want to learn. Books, magazines and video tutorials usually write it as “15 pulli 1 varisai”, “15-1”, “21 to 11 idukku pulli” or “7 x 7 ner pulli”. Type it exactly as you see it; the word “to” and spaces are understood.
- Choose the dot style. If the source says idukku, idai or interlaced, keep Interlaced. If it says ner pulli, straight or parallel dots, choose Straight. The style only matters for two-number counts such as 15-1; rectangles and explicit lists are drawn exactly as written.
- Press “Make grid”. The preview shows every dot, and the summary lists the number of rows, the widest row, the total number of dots and the row lengths from top to bottom so you can check them against your source.
- Print or download. “Print grid” sends only the grid to your printer. In the print dialog choose Scale 100% or Actual size. “Download SVG” saves a vector file you can open in any browser or design program, or send to a print shop for a larger sheet.
- Practise, then go to the floor. Draw the kolam over the printed dots with a pencil until the line feels natural. The floor estimate tells you how much space the dot area will need at the gap you usually leave between dots.
A worked example: 15-1 interlaced and 9-1 straight
A very common Margazhi pattern is 15-1 interlaced. The middle row has 15 dots. The rows on either side have 14, 13, 12 and so on down to a single dot, so there are 29 rows in total. Because each row is one dot shorter than its neighbour and every row is centred, the dots of one row fall into the gaps of the next — that is the interlaced (idukku) look. The tool reports 225 dots: 15 in the middle plus twice the sum of 1 to 14.
Now compare 9-1 straight. With straight (ner) dots the rows must stay in columns, so each row drops by two dots: 1, 3, 5, 7, 9, 7, 5, 3, 1. That is only nine rows and 41 dots, and every dot sits directly below another. If you type a straight count whose numbers are not both odd or both even, such as 6-1, the tool explains that it cannot be drawn in straight columns and suggests a valid count.
With “Fit to A4” ticked, 15-1 interlaced gets 9.5 mm spacing, so the dots span 133 × 266 mm and fit comfortably on one A4 sheet. At 4 cm on the floor the same pattern needs roughly 56 × 112 cm — useful to know before you start at the doorstep.
How the grid is calculated
Every row is centred on the widest row. For a two-number count A-B, the tool places the middle row of A dots and then adds rows above and below that shrink by one dot (interlaced) or two dots (straight) until they reach B. Centring a row that is one dot shorter shifts it by half a space, which is exactly how interlaced dots are laid out by hand; shrinking by two keeps the shift at a whole space, so the columns line up.
A count such as 7x5 is read as 7 dots across and 5 rows down. A list such as 1-3-5-3-1 is taken literally as the length of each row from top to bottom, which lets you reproduce irregular shapes from a book. Sizes are written into the file in millimetres, so a printer set to 100% reproduces the spacing exactly. The floor estimate multiplies the number of gaps across and down by your floor spacing.
Limits and things to check
- Dot-count notation is not standardised. A few families and books write the end row differently or count only half the pattern. Always compare the row lengths in the summary with your source before you print a large sheet.
- The tool makes the dots only. It does not draw the kolam lines, because the same dots can carry hundreds of designs.
- Rows are limited to 61 dots and grids to 121 rows to keep the page responsive. Very large grids are better split across several sheets.
- Some printers add their own margin or shrink pages slightly. Measure the gap between two printed dots with a ruler if exact spacing matters.
- Floor sizes are approximate: hand-placed dots vary, and you will want extra room around the outside for the kolam lines.
Your entries stay on this page
The grid is generated by JavaScript in your own browser. Nothing you type is sent anywhere, there is no account, no tracking and no storage. Once the page has loaded it works offline.
Frequently asked questions
What does 15-1 mean in a pulli kolam?
It means the middle row has 15 dots and each row above and below has fewer dots until the last row has 1. With interlaced (idukku) dots each row drops by one dot; with straight (ner) dots it drops by two so the dots stay in columns.
What is the difference between ner pulli and idukku pulli?
In ner pulli (straight dots) every dot sits directly under the dot above it. In idukku or idai pulli (interlaced dots) each row is shifted by half a space, so a dot sits in the gap between two dots of the next row.
How do I print the grid at the right size?
Use the Print button and choose Scale 100% or Actual size in the print dialog. Do not choose Fit to page, or the spacing will change.
How much floor space will my kolam need?
Enter the gap you leave between dots on the floor, for example 4 cm. The tool multiplies it by the number of gaps across and down and shows the approximate width and height of the dot area.
Can I use the grid for rangoli, embroidery or classroom maths?
Yes. The SVG file scales cleanly, so it works as a base for rangoli practice, cross-stitch layouts, symmetry lessons and one-line drawing exercises.