Applications / Sports and events
Sports day heat and lane draw
Paste the entries for one race, choose the number of lanes, and get evenly sized heats with a lane for every runner. Seed by best time, put the fastest runners in the last heat, or make a fair random draw that keeps children from the same house apart. Print the start lists with blank result columns for the judges.
Draw heats and lanes
How to use
- Copy the names for one event from your entry sheet or spreadsheet and paste them, one per line. Add the house (or school, or class) after a comma, and a best time after a second comma if you have one from trials.
- Select the number of lanes marked on your track. A 200 m school track often has 6 lanes; a district stadium usually has 8.
- Choose a method. Use a seeded method when you have trial times, and the random draw when you do not. The random draw is repeatable: write the draw number in your records so anyone can check it.
- Press Make start lists, check the heats, then print. Each heat prints as its own table with empty Result and Place columns for the finish judges.
- Run the next event by pasting its entries. Download the CSV if you want to keep all start lists in one spreadsheet.
How it works
Number and size of heats. Heats = runners ÷ lanes, rounded up. The runners are then spread as evenly as possible, with any extra runner going to the earlier heats. 17 runners on 8 lanes become 6, 6 and 5 rather than 8, 8 and 1, so nobody runs alone.
Serpentine seeding. Runners are ranked by time (runners without a time go last, in the order you typed them). The ranked list is dealt 1, 2, 3, 3, 2, 1, 1, 2, 3… so every heat gets one of the fastest, one of the next fastest, and so on. This is fairest when heat winners or the fastest times go through to a final.
Fastest in the last heat. The fastest group runs last, the slowest first. Use it for timed finals, where places come from times across all heats and the closest races should be side by side.
Lanes. In seeded draws the fastest runner in a heat gets the first lane in the lane order, the next fastest the second, and so on. The default order starts in the centre and moves outwards, because centre lanes have the gentlest bends and are least affected by wind and lane-line confusion. If a heat has fewer runners than lanes, the outside lanes stay empty. In random draws the lanes are shuffled among the same best lanes.
Keeping houses apart. In the random draw the runners are shuffled, grouped by house, then dealt round the heats in turn, so housemates spread across different heats. The summary reports how many housemates still share a heat and the lowest number that is possible: a house with 5 runners in 3 heats must have at least 2 runners sharing.
Worked example
Press Load example: 19 boys from four houses in the under-14 100 m, 8 lanes, serpentine seeding. 19 ÷ 8 = 2.4, so there are 3 heats of 7, 6 and 6 runners.
Ranked by time, Mani (12.7) is first, Charan (12.9) second and Farhan (13.0) third, so each leads a different heat. Heat 1 takes ranks 1, 6, 7, 12, 13, 18 and 19: Mani 12.7 in lane 4, Hari 13.5 in lane 5, Karthik 13.6 in lane 3, Lokesh 14.3 in lane 6, Vasanth 14.4 in lane 2, Jeeva 15.8 in lane 7 and Sathish, who has no trial time, in lane 1. Lane 8 is left empty.
Red, Blue and Green have 5 runners each and Yellow has 4. With only 3 heats, at least 2 + 2 + 2 + 1 = 7 housemates must share a heat, and the summary shows "Housemates sharing a heat: 7 (lowest possible 7)". Switch the method to Random draw and the result still reaches that minimum.
Limits
- House separation is applied only in the random draw. Seeded draws follow the times strictly, because moving a runner to separate houses would break the seeding.
- The tool does one event at a time. It does not build a full programme timetable, check that a child is not in two events at once, or calculate points for houses.
- It does not pick qualifiers for the final; use your own rule, such as first two in each heat plus the next two fastest.
- Long-distance races with group starts and field events (long jump, shot put) do not use lanes; for those, use the random draw only for the order of competing.
Privacy
Children's names stay on your device. The draw runs in your browser, nothing is uploaded and nothing is kept after you close the page unless you print it or download the CSV.
Frequently asked questions
How many heats do I need?
Divide the number of runners by the number of lanes and round up. 19 runners on 8 lanes need 3 heats, which the tool fills as 7, 6 and 6 so no heat is left with one or two runners.
What is serpentine seeding?
Runners are ranked by best time and dealt to heats 1, 2, 3, 3, 2, 1, 1, 2, 3 and so on, so every heat gets a similar mix of fast and slow runners.
Can I repeat the same random draw?
Yes. The random draw uses the draw number you enter. The same list and the same draw number always give the same heats and lanes, which is useful if a parent or coach asks how the draw was made.
Which lanes do the fastest runners get?
In seeded draws the fastest runner in each heat gets the first lane in the lane order — by default the centre lane — then the lanes next to it, moving outwards. Type your own order, for example 3,4,5,6,2,7,1,8, if your meet uses a different rule.
Does it work for swimming?
Yes. A pool with 6 or 8 lanes works the same way: enter entry times and use a seeded method.